Smeg PTS605NU3 Manuel d'instructions télécharger pdf (Page 3)

Conversion Kit

Remove all the burner components in the numerical order shown below:

• Remove the pan stands (Fig.1) by lifting them from the back (1) and extracting them (2). (On 70 cm

cooktops remove the central pan stand first; on 60 cm cooktops the right-hand pan stand must be

removed first);

• remove all the knobs (3, Fig. 2) by pulling them outward;

• lift all the burner components off the cooktop (4-5, Pic. 2);

• use the wrench 6 (Fig. 3) to open the bayonet fastenings of the burner fixing rings, applying leverage

on the guides 7;

• after removing all the components described above, lift the front of the cooktop's upper surface (8,

Fig. 4).

• the burners and gas taps can only be accessed by pushing the rear of the cooktop gently upwards

with the aid of a tool (9-10, Fig. 5).

This is necessary to release the internal snap fixing devices. The cooktop's upper surface can now be

removed. Some models may have 2 additional pins at the side (Fig. 5), which must be removed in the

same way, using a tool to apply leverage to the cooktop.

Fig. 1) Fig. 2)

Fig. 3)

Fig. 4) Fig. 5)

1 2 3 4 5 6

Pas de commentaire

Smeg PTS605NU3 Manuel d'instructions Page 3