Smeg CMSC45NE Manuel télécharger pdf (Page 10)

Fix the power cable with the clip to avoid it

tangling when the appliance is inserted or

extracted.

The power cable must be long enough to allow

the appliance to be extracted from the cabinet

to fill the coffee beans container.

The appliance must be earthed in compliance

Position the appliance on the rails, making sure

the pins are correctly inserted in the housings,

then fix it with the screws supplied.

If necessary, correct alignment of the appliance

by positioning the spacers supplied under or at

the sides of the support.

x 16 x 2

Position the rails on the sides of the cabinet as

shown in the figure.

Fix with the screws, then extract completely.

If the coffee maker is installed over a warmer

drawer (500 W max.), use the top surface of this

as a reference to position the rails.

In this case, there will be no surface to rest the

rails on.

approx. 350mm

x 1

x 4

560 + 1 mm

with legislation.

Electrical connections must be performed by a

qualified electrician in compliance with the

manufacturer's instructions and legislation in

force in the country of installation.

The mains socket should be easily accessible.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Pas de commentaire

Smeg CMSC45NE Manuel Page 10