Smeg CMSC45NE Manuel télécharger pdf (Page 19)

20

Use of other descalers invalidates the guarantee.

Failure to descale the appliance as described also

invalidates the guarantee.

Over time, constant heating up of the water used

to make the coffee leads to limescale building up

in the inner circuits of the appliance.

When "DESCALE" is displayed, the machine re-

quires descaling.

Proceed as follows:

• Make sure the appliance is ready for use and

the water softener filter (if present) has been

removed.

• Press the MENU button (B6) then press the

NEXT button (B7) repeatedly until the ap-

pliance displays "DESCALE NO".

• Press the CHANGE button (B8) and the ap-

pliance displays "DESCALE YES".

• Press the OK button (B9). The message "ADD

DESCALER PRESS OK" is displayed.

• Empty the water tank, pour the contents of

the descaler bottle into the tank respecting

the instructions given on the descaler pack,

then add water up to the MAX level marked

on the water tank.

When descaling subsequently, use descaler

of the same type and brand as supplied (avai-

lable from the manufacturer's authorised Cu-

stomer Services) or a descaler

recommended by Customer Services. Always

follow the instructions on the pack.

• Place a container with a minimum capacity

of 1.5 litres under the cappuccino maker (fig.

3).

• Press the OK button. Descaler flows out of

the cappuccino maker into the container

below. "APPLIANCE IN DESCALE" is displa-

yed.

• The descale programme automatically per-

forms a series of deliveries and pauses to re-

move limescale deposits from inside the

machine.

• After about 30 minutes, the appliance di-

splays "RINSING FILL TANK".

The appliance must now be rinsed through

to eliminate residues of descaling solution

from inside the appliance. Proceed as fol-

lows:

• Empty the water tank, rinse and fill with clean

water.

• Replace the tank;

• Empty the full container and put back under

the cappuccino maker.

• Press the OK button. Hot water flows out of

the cappuccino maker spout into the contai-

ner below and the appliance displays "RIN-

SING".

• When the water tank is empty, the appliance

displays the message "RINSING COM-

PLETE... PRESS OK".

• Press the OK button and refill the water tank

with clean water.

• The descale programme is now terminated

and the appliance is ready to make coffee

again.

NOTE: If descaling is interrupted before com-

pletion, the machine still displays the desca-

ling message and the process must be begun

again from the beginning.

Empty the water tank, rinse with clean water

and deliver a cup of hot water.

Important!

FAILURE TO DESCALE THE

APPLIANCE REGULARLY INVALIDATES THE

GUARANTEE.

Changing coffee temperature

To change coffee temperature, proceed as fol-

lows:

• Press the MENU button (B6), then press the

NEXT button (B7) repeatedly until the ap-

pliance displays "TEMPERATURE HIGH...".

• Press the CHANGE button (B8) until the ap-

pliance displays the required coffee tempe-

rature.

• Press the OK button (B9) to confirm.

• Press the MENU button to exit programming

mode or NEXT to change other parameters.

Changing the length of time the

appliance remains on (Energy

saving function)

The appliance is set by default to go off automa-

tically 1 hour after the last coffee has been made.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Commentaires sur ces manuels

Pas de commentaire