Smeg DF6SPLUS Manuel d'instructions télécharger pdf (Page 30)

User instructions

5. Cleaning and maintenance

Before carrying out any work, always unplug the appliance from the

electrical supply or switch off the all-pole disconnection device.

5.1 General warnings and recommendations

Avoid the use of acidic or abrasive detergents.

Clean the outer surfaces and door-lining of the dishwasher regularly

using a soft cloth moistened with water or with a normal detergent

suitable for painted surfaces. Clean the door gaskets with a damp

sponge. Periodically (once or twice a year) it is advisable to clean the

tank and gaskets, using a soft cloth and water to remove any deposits.

CLEANING THE WATER INTAKE FILTER

The water intake filter A located at the outlet of the water supply tap

needs to be cleaned periodically.

After having closed the water supply tap, unscrew the end of the water

intake hose, remove the filter A and clean it delicately under running

water. Reassemble filter A in its seat and carefully screw the water

intake hose back into position.

CLEANING THE SPRAY ARMS

The spray arms can be easily removed for periodic cleaning of the

nozzles, to prevent possible clogging. Wash them under running water

and carefully replace them in their seats, checking that their rotary

movement is in no way impeded.

• To remove the upper spray arm, unscrew locking ring R.

• To remove the lower spray arm, simply lift it up, pulling by the

central part.

• To remove the orbital spray arm assembly, take hold of the longer

arm and pull the orbital unit upward. Wash the arms under a jet of

running water and return them carefully to their seat. After

reassembly, check that the spray arms turn freely. Otherwise,

check that they have been installed correctly.

ORBITAL

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Smeg DF6SPLUS Manuel d'instructions Page 30