Smeg DWF66WH Manuel d'utilisateur télécharger pdf (Page 13)

User instructions

ADJUSTING THE WATER SOFTENING SYSTEM

The dishwasher is equipped with an electronic device for adjusting the water softening setting

according to the hardness of the water. To adjust the water softening setting, proceed as follows:

•

Press down the

HALF LOAD (3)

button for a few seconds until the

symbol appears on the

INFORMATION DISPLAY (4)

•

Press the

START/STOP (5)

button to access the water softening settings (the current setting

appears on the information display).

•

Press the

HALF LOAD (3)

button again to select the desired hardness setting (

h1, h2... h5

Choose the value by referring to the “Water hardness table”.

•

Press the

START/STOP (5)

button to exit the set-up mode.

WATER HARDNESS TABLE

WATER HARDNESS

German Degrees (°dH) French Degrees (°dF)

SETTING

0 - 4 0 - 7 .h 0

5 - 15 8 - 25 .h 1

16 - 23 26 - 40 .h 2

24 - 31 41 - 60 .h 3

32 - 47 61 - 80 .h 4

48 - 58 81 - 100 .h 5

Contact your local water board for information on the hardness of your water supply.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 26 27

Pas de commentaire

Smeg DWF66WH Manuel d'utilisateur Page 13