Smeg ST8246U Manuel télécharger pdf (Page 49)

USER INSTRUCTIONS

INSTALLATION INSTRUCTIONS

BEFORE MAKING ELECTRICAL CONNECTIONS, DISCONNECT THE

MAINS POWER SUPPLY FROM THE WORK AREA.

CHECK THAT THE MAINS SUPPLY IN THE PLACE OF INSTALLATION

COMPLIES WITH THE REGULATIONS IN FORCE IN THE COUNTRY OF

USE, AND THAT IT IS CORRECTLY EARTHED.

THIS APPLIANCE MUST BE EARTHED. IN CASE OF A MALFUNCTION OF

FAULT, THE EARTH REDUCES THE RISK OF ELECTROCUTION BY PRO-

VIDING THE ELECTRICAL CURRENT WITH AN ALTERNATIVE, LESS

RESISTANT PATH. THIS APPLIANCE IS FITTED WITH A SUPPLY CORD

CONTAINING AN EARTH WIRE AND PLUG. FIT THE PLUG INTO A SUIT-

ABLE SOCKET, INSTALLED AND EARTHED IN COMPLIANCE WITH THE

LAWS IN FORCE IN THE COUNTRY OF INSTALLATION.

AN INCORRECTLY CONNECTED EARTH WIRE MAY GENERATE THE RISK

OF ELECTROCUTION. IF IN DOUBT AS TO THE CORRECT EARTHING OF

THE APPLIANCE, CALL IN A QUALIFIED ELECTRICIAN OR THE TECH-

NICAL ASSISTANCE SERVICE. DO NOT CHANGE THE PLUG ATTACHED

TO THE APPLIANCE. IF THE PLUG IS NOT SUITABLE FOR THE SOCKET,

CALL IN A QUALIFIED ELECTRICIAN TO FIT A SUITABLE PLUG.

IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT REPLACED

BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE

CENTRE IN ORDER TO AVOID ANY RISK.

DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT CONNEC-

TIONS IN ORDER TO AVOID THE POSSIBILITY OF OVERHEATING OR

BURNING, WITH CONSEQUENT FIRE HAZARD.

1 2 ... 44 45 46 47 48 49 50

Pas de commentaire

Smeg ST8246U Manuel Page 49