Smeg Arco Isola Plus KSEIV96X Manuel d'utilisateur télécharger pdf (Page 8)

18GB

12f

12e

Cmd

12c

Lux

Flue assembly - Mounting the hood body

• Position the upper chimney section and fix the

upper part to the frame using the 2 screws 12c

provided.

• Fit the lower chimney section onto the frame,

holding it in place until the hood body has been

fixed in place.

Recirculation version

• Make sure that the outlet of the extension piece

14.1 is horizontally and vertically aligned with

the chimney outlet.

• If this is not the case, remove the lower chimney

section and adjust the position by cutting the

hood body extension 14 along one of the thinner

section channels denoting the pre-fixed lenghts,

then reassemble as described previously.

Before fixing the hood body to the frame:

• Remove the grease filters from the hood body;

• Remove any activated charcoal filters.

• From below, use the 4 screws 12f provided to

fix the hood body to the frame.

• For the recirculation version, locate the

directional grill 8 in its housing. Ensure that it

is inserted correctly in connector 15.

ELECTRICAL CONNECTION

• Connect the hood to the mains through a two-

pole switch having a contact gap of at least 3 mm.

• Connect the control connector Cmd.

• Connect the lights connector Lux.

• Place the connectors in the junction box 24 and

close it using the 2 screws 12e (2,9 x 9,5)

provided.

• Fix the junction box to the hood body using the

2 screws 12c (2,9 x 6,5) provided.

• For the recirculation version, fit the activated

carbon odour filter.

• Replace the grease filters.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Smeg Arco Isola Plus KSEIV96X Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Ventilateurs Smeg Arco Isola Plus KSEIV96X