Smeg KSE 91X Manuel d'utilisateur télécharger pdf (Page 4)

SMEG reserves the right to make changes and corrections to its products as it deems

necessary, without altering their basic characteristics.

During cleaning and maintenance work,

make sure the safety instructions set out

on page 14 are fully satisfied.

• If your kitchen hood is made from stainless

steel, use suitable cleaners mentioned in

the product instructions.

• If your kitchen hood is painted, use

lukewarm water and a neutral soap.

• Never use metallic scourers, nor abrasive

or corrosive products.

• Dry the kitchen hood using a cloth that

does not produce fibres.

• The use of vapour cleaners is not

recommended.

To remove the filters from their fittings, press

lightly on the locks and then pull them off.

The metal filters can be cleaned by soaking

them in hot water with neutral detergent until

the fat dissolves and then rinsing them under

the tap or using special anti-grease products.

They can also be washed in a dishwasher. In

this case, it is advisable to stack them

vertically to avoid food residues to stick to

them.

Dishwasher cleaning may damage the

metallic surface (blackening it), although this

will not affect its fat retention capacity.

Once clean, leave them to dry off and then fit

them back to the kitchen hood.

Proceed as follows:

• Remove the metal filters.

• Change the broken/burnt out lamp.

Maximum lamp power is 40W (E-14).

• Fit the metal filters.

Cleaning the metal filters

Cleaning the hood body

Cleaning and maintenance

_________________________________________________________

Problem solving

Proceed with the following checks before calling the Technical Service:

Changing light bulbs

Sizes and specifications

See page 39.

1 2 3 4 5 6 7

Libretto istruzioni 1

Commentaires sur ces manuels

Pas de commentaire

Smeg KSE 91X Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Ventilateurs Smeg KSE 91X