Smeg UKS3F092P Manuel d'utilisateur télécharger pdf (Page 5)

OPERATION

Control panel

1 2 3 4 5

1

Pilot light

2

Temperature regulator

3

Super light

4

Super switch and Alarm reset switch

5

Alarm light

Switching on

• Insert the plug into the wall socket

• Turn the Temperature regulator

clockwise to a medium setting.

The pilot light will light up

If the temperature inside the appliance is

too high the Alarm light will blink. Active the

Super function.

Switching off

To turn off the appliance, turn the

Temperature regulator to the "O" position.

The pilot light will switch off.

Temperature regulation

The temperature is automatically regulated.

To operate the appliance, proceed as

follows:

• turn the temperature regulator

toward lower settings to obtain the

minimum coldness.

• turn the temperature regulator

toward higher settings to obtain the

maximum coldness.

A medium setting is generally

the most suitable.

However, the exact setting

should be chosen keeping in

mind that the temperature inside

the appliance depends on:

• room temperature

• how often the door is

opened

• the quantity of food

stored

• the location of the

appliance.

Super function

You can activate the Super function by

pressing the Super switch.

TheSuper light will light up.

This function stops automatically

after 52 hours.

It is possible to deactivate the

function at any time by pressing

Super switch.

The Super light will switch off.

High temperature alarm

An increase in the temperature in a

compartment (for example due to an power

failure) is indicated by flashing of the Alarm

light.

5

1 2 3 4 5 6 7 8 9 10 ... 19 20

Commentaires sur ces manuels

Pas de commentaire