Smeg C176DN2PA Manuel d'utilisateur télécharger pdf (Page 13)

Problem Possible cause Solution

A square symbol is shown in-

stead of numbers on the

Temperature Display.

Temperature sensor prob-

lem.

Contact the nearest Authorised

Service Centre (the cooling sys-

tem will continue to keep food

products cold, but temperature

adjustment will not be possi-

ble).

The lamp does not work. The lamp is in stand-by. Close and open the door.

The lamp does not work. The lamp is defective. Contact the nearest Authorised

Service Centre.

The compressor operates

continually.

Temperature is set incor-

rectly.

Refer to "Operation".

Many food products were

put in at the same time.

Wait some hours and then

check the temperature again.

The room temperature is

too high.

Refer to climate class chart on

the rating plate.

Food products placed in

the appliance were too

warm.

Allow food products to cool to

room temperature before stor-

ing.

The door is not closed cor-

rectly.

Refer to "Closing the door".

The FastFreeze is switched

on.

Refer to "FastFreeze function".

The Shopping is switched

on.

Refer to "Shopping function".

There is too much frost and

ice.

The door is not closed cor-

rectly or the gasket is de-

formed/dirty.

Refer to "Closing the door".

The water drainage plug is

not correctly positioned.

Position the water drainage

plug in the correct way.

Food products are not

wrapped properly.

Wrap the food products better.

Temperature is set incor-

rectly.

Refer to "Operation" .

The compressor does not

start immediately after press-

ing the FastFreeze, or after

changing the temperature.

This is normal, no error has

occurred.

The compressor starts after a

period of time.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Smeg C176DN2PA Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs-congélateurs Smeg C176DN2PA