Smeg UKC7280NEP1AO Manuel d'utilisateur télécharger pdf (Page 6)

A B

C

D

E

• A - green and yellow: Earth

• C - brown: Live

• D - blue: Neutral

As the colours of the wires in the mains

lead of this appliance may not correspond

with the coloured markings identifying the

terminals in your plug, proceed as follows:

1. Connect the wire coloured green and

yellow to the terminal marked either

with the letter “E“ or by the earth

symbol

or coloured green and

yellow.

2. Connect the wire coloured blue to the

terminal either marked with the letter

“N“ or coloured black.

3. Connect the wire coloured brown to

the terminal either marked with the

“L“ or coloured red.

4. Check that no cut, or stray strands of

wire is present and the cord clamp (E)

is secure over the outer sheath.

Make sure the electricity supply

voltage is the same as that indicated

on the appliance rating plate.

5. Switch on the appliance.

The appliance is supplied with a 13 amp

fuse (B). In the event of having to change

the fuse in the plug supplied, a 13 amp

ASTA approved (BS 1362) fuse must be

used.

WARNING! A cut off plug

inserted into a 13 amp socket

is a serious safety (shock)

hazard. Ensure that it is

disposed of safely.

Ventilation requirements

The airflow behind the appliance must be

sufficient.

5 cm

min.

200 cm

2

min.

200 cm

2

CAUTION! Refer to the

assembly instructions for the

installation.

6

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Commentaires sur ces manuels

Pas de commentaire