Smeg BQ6030 Manuel d'utilisateur télécharger pdf (Page 5)

Instructions for the Installer

ADJUSTING THE PRIMARY AIR FLOWS

The operations below must be carried out for every

burner in the barbecue section:

ADJUSTING THE PRIMARY AIR FLOW FOR "U"-

SHAPED BURNERS

1 Undo the adjuster screw A of the air regulator

sleeve.

2 Turn the regulator sleeve B into the position for the

type of gas to be used, consulting the table below.

3 Tighten the regulator screw, making sure that the

distance X is correct (see table below).

ADJUSTING THE PRIMARY AIR FLOW FOR

"PARALLEL FLAME" BURNERS

1 Undo the adjuster screw A of the air regulator

sleeve.

2 Pull the regulator sleeve B out or push it in to

achieve the position for the type of gas to be used,

consulting the table below.

3 Tighten the regulator screw, making sure that the

distance X is correct (see table below).

NATURAL GAS

(N) U-shaped

burners

G30/G31 (LPG)

U-shaped

burners

NATURAL GAS (N)

Parallel flame

burners

G30/G31 (LPG)

Parallel flame

burners

X = 4 mm 8 mm 2 mm 8 mm

1 2 3 4 5 6

Pas de commentaire

Smeg BQ6030 Manuel d'utilisateur Page 5