Smeg A2-5 Manuel d'utilisateur

Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE_______________ 37 2. INSTALLATION OF THE APPLIANCE________________________ 39 3. ADAPTATION TO D

Instructions for the user 5. DESCRIPTION OF CONTROLS 5.1 Front control panel All the cooker controls and commands are on the front panel. Th

Instructions for the user THERMOSTAT KNOB (OVENS) Selection of cooking temperature is carried out by turning the knob clockwise to the required tem

Instructions for the user 5.2 Electronic Analogue Clock LIST OF FUNCTIONS MINUTE-MINDER BUTTON AUTOMATIC SWITCH-OFF TIMING BUTTO

Instructions for the user 5.2.2 Minute-minder This function does not stop cooking but just triggers the beeps. - When the key is pressed the dis

Instructions for the user - When the end of the cooking time is reached, the timer will switch off the oven heating elements, the beeps will star

Instructions for the user 6. USE OF THE COOKING HOB 6.1 Lighting of the cooking hob burners Before lighting the hob burners check that the fl

Instructions for the user 7. USE OF THE OVENS 7.1 Warnings and general advice Before using the oven for the first time, pre-heat it to maximum t

Instructions for the user 7.4 Storage compartment The storage drawer is at the bottom of the cooker, underneath the oven. For access, pull the bot

Instructions for the user 9. COOKING HINTS In fan-assisted mode preheating should be carried out at 30/40°C above the cooking temperature. Thi

Instructions for the user 9.2 Hot-air cooking (main oven) FUNCTION SWITCH THERMOSTAT SELECTOR SWITCH FROM 50° TO 250°

Introduction 1. INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY

Instructions for the user 9.4 Hot-air grilling (main oven) FUNCTION SWITCH THERMOSTAT SWITCH FROM 50° TO 200°C Ensures uniform

Instructions for the user 9.6 Defrosting (main oven) FUNCTION SWITCH THERMOSTAT SWITCH IN POSITION 0 The flow of air produc

Instructions for the user 9.7 Spit cooking (auxiliary oven) FUNCTION SWITCH THERMOSTAT SWITCH AT MAXIMUM This type of cookin

Instructions for the user 9.8 Recommended cooking table Cooking times, especially meat, vary according to the thickness and quality of the food and

Instructions for the user 4 2 - 4 2 - 3 TOAST HOT-AIR COOKING FROM BELOW TEMPERATURE (°C) IN MINUTES LEVEL TIME FIRST COU

Instructions for the user 10. CLEANING AND MAINTENANCE Cleaning stainless steel 10.1 Before performing any operations requirin g access to

Instructions for the user 10.2.2 Burner caps, flame cap crowns and burners To facilitate cleaning, caps, flame cap crowns, and burners are all re

Instructions for the user For easier cleaning, the storage drawer underneath the oven can becompletely removed. Pull it right out and raise the fro

Instructions for the user 10.3.4 Assembling the self-cleaning liners 1. Remove all accessories from the oven; 2. Remove the side grilles

Instructions for the user 11. EXTRAORDINARY MAINTENANCE Ovens periodically require small maintenance interventions or replacement of parts subject

Introduction THE I.D. PLATE WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME IS POSITIONED VISIBLY IN THE STORAGE COMPARTMENT. THE PLATE M

Instructions for the user 11.2 Removing the door Open the door completely and fit the pins (supplied) into the holes from the inside. Close the

Instructions for the installer 2. INSTALLATION OF THE APPLIANCE It is the law that all gas appliances are installed by competent persons. Corgi

Instructions for the installer For operation on 380-415V3N∼: use an H05RR-F-type five-core cable (5 x 1.5 mm2). For operation on 380-415V2N

Instructions for the installer 2.3 Connecting to natural and LPG gas (Please see connection diagram) Make the connection to the appliance using f

Instructions for the installer 3. ADAPTATION TO DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, detach the applian

Instructions for the installer 3.2 Burner and nozzle characteristics table Burner Rated heating capacity(kW) LPG – G30/G31 28/37 mbar Nozzl

Instructions for the installer 4.1 Adjustment of minimum for natural gas Light the burner and take it to the minimum . Remove the gas tap knob and