Smeg ER12550NL Manuel d'utilisateur

Contents 18 1. INSTRUCTIONS FOR SAFE AND PROPER USE _______________19 2. POSITIONING OF HOB ____________________________________21 3. ELECTRICAL

Instructions for the installer 27 5.3 Regulation for natural gasThe hob has been inspected for G20 (2H) natural gas at a pressure of 20 mbar. To al

Instructions for the installer 28 6. FINAL OPERATIONSHaving carried out the above adjustments, reassemble the appliance following, backwards, the i

Instructions for the installer 29 6.3 Arrangement of burners on hob BURNERS 1. Auxiliary 2. Triple crown 3. Double crown 6.4 Lubrica

Instructions for the user 30 7. USING THE HOB Make sure that the flame-baffle crowns, the caps and the grid have been assembled correctly. Grid

Instructions for the user 31 7.3 Diameter of containers BURNERS 1. Auxiliary 2. Triple crown 3. Double crown Ø min. and max. (in cm) 7-18

Instructions for the user 32 8.2 Cleaning of cooking hob components Grids, caps, flame cap crowns and burners can be removed for ease of cleaning.

Introduction 19 1. INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY

Introduction 20 THE IDENTIFICATION PLATE, WITH TECHNICAL DATA, SERIAL NUMBER AND MARKING IS CLEARLY VISIBLE UNDER THE CASING. THE PLATE ON THE CASI

Instructions for the installer 21 2. POSITIONING OF HOB The following operation requires building and/or carpentry work so must be carried out

Instructions for the installer 22 3. ELECTRICAL CONNECTION Make sure that the voltage and capacity of the power line conform to the data shown on

Instructions for the installer 23 4. GAS CONNECTION Connection to the gas mains may be made with a rigid copper pipe or with a flexible pipe and co

Instructions for the installer 24 4.1 Connection to LPG Use a pressure regulator and make the connection to the tank according to the provisions of

Instructions for the installer 25 5. ADAPTATION TO DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, detach theapplianc

Instructions for the installer 26 5.2 Regulation for LPGLoosen screw A and push support B all the way. Use a double head wrench to remove nozzle C