Smeg Glass Ceramic Induction Hob SE2642ID2 Manuel d'utilisateur télécharger pdf (Page 16)

Instructions for assembly

Bracket

• Insert the hob and align it.

• From the bottom, insert the brackets with

screws in the holes provided for fastening

the brackets, align the brackets and screw

them tight.

• Tighten the screws with a hand screw

driver only; do not use a battery-operated

screw driver.

• In the case of thin worktops make sure

that the brackets are correctly positioned.

A metric screw must be used on the

bracket to balance it.

Important!

There is a risk of breakage if the hob is

canted or subjected to stress during

installation!

Minimum distance to adjacent walls

Cut-out dimension

Outer dimensions of the hob

Cable routing in rear wall

Installation height

Type

1 2 ... 11 12 13 14 15 16 17

Pas de commentaire

Smeg Glass Ceramic Induction Hob SE2642ID2 Manuel d'utilisateur Page 16