Smeg PGF95K-3 Manuel d'utilisateur

Summary 1 INSTRUCTIONS FOR SAFE AND PROPER USE_______________ 20 2 POSITIONING OF THE HOB_______________________________ 22 3 ADJUSTMENT TO DIFFE

Instructions for the installer 28 3 ADJUSTMENT TO DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, unplug theapplian

Instructions for the installer 29 3.2 Burner and nozzle characteristics table Burner Rated heating capacity (kW) LPG – G30/G31 30/37 mbar

Instructions for the installer 30 4 FINAL OPERATIONS After carrying out the above adjustments, remount in reverse order to the instructions given

Instructions for the user 5 USING THE HOB 5.1 Ignition of the burners Before turning on the burners, make sure that the flame-spreader cro

Instructions for the user 32 If the burners turn off accidentally, a safety device will trip after about 20 seconds to cut off gas flow (even with

Instructions for the user 6 CLEANING AND MAINTENANCE Before any intervention, disconnect the appliance from the mains. Never use a steam jet

Instructions for the user 34

Introduction 1 INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AN

Introduction THE APPLIANCE DATA PLATE, WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME, IS POSITIONED AT A VISIBLE POINT UNDER THE SAFETY C

Instructions for the installer 22 2 POSITIONING OF THE HOB The following operation requires building and/or carpentry work so must be carried out

Instructions for the installer 23 2.2 Attachment to support structure, flush-mounting model Create an opening with the dimensions shown in the f

Instructions for the installer 24 Overall dimensions: location of gas and electrical connection points (all measures in mm). Caution: surf

Instructions for the installer 25 2.3 Electrical connection Make sure that the voltage and capacity of the power supply cable conform to the dat

Instructions for the installer 26 2.4 Ventilation requirements The appliance may be installed only in rooms with permanent ventilation, as requi

Instructions for the installer 27 2.6 Gas connection Connection to the gas mains may be made with a rigid copper pipe or with a flexible pipe c