Smeg APL360XC Manuel d'utilisateur télécharger pdf (Page 27)

Instructions for the Installer

Never use the door for leverage when inserting

the oven in the cabinet. Never apply excessive

pressure to the open door.

12.3 Hob-oven connection

Once installed, the combined hob must be connected to the oven. Fit the

oven into the built-in installation opening, leaving enough room to carry out

the operations described below:

connect the yellow-green earth wire of the hob to the oven's earth terminal

A (see figure);

connect the hob connectors to the sockets provided on the top casing of

the oven. The colours and symbols of the connectors must correspond to

those on the oven sockets;

if the hob has a residual heat warning device connector, connect it to the

unused socket on the right-hand side.

At this point the oven can be completely built-into the cabinet, taking care

to place the power supply lead along the best possible route and ensuring

that it is not touching hot parts.

1 2 ... 22 23 24 25 26 27

Pas de commentaire

Smeg APL360XC Manuel d'utilisateur Page 27