Smeg FA166-5 Manuel d'utilisateur télécharger pdf (Page 4)

Instructions for the user

2. INSTALLATION

2.1 Electrical connection

Check that mains voltage and power cable ratings are as per the

indications provided on the label attached to the oven door frame.

This label must never be removed.

It is obligatory for the electrical system to be grounded according to the

methods required by safety rules.

If a plug and socket connection is being used make sure that the plug

and socket are compatible. Avoid use of adapters and shunts as these

could cause overheating and risk of burns.

If a fixed connection is being used fit power line with an omnipolar circuit

breaker with a contact opening gap equal to or greater than 3 mm in an

easily accessible position in proximity to the oven.

For operation on 230-250V

∼

: use an

H05RR-F / H05RN-F / H05V2V2-F type

three-core cable (3 x 1.5 mm

The cable end to be connected to the

appliance must be provided with an ground

wire (yellow-green) at least 20 mm longer.

The manufacturer declines all responsibility for damage to persons

or things caused by non-observance of the above prescriptions or by

interference with any part of the appliance.

1 2 3 4 5 6 7 8 9 ... 23 24

Pas de commentaire

Smeg FA166-5 Manuel d'utilisateur Page 4