Smeg SE995XT-7 Manuel d'instructions télécharger pdf (Page 10)

Instructions for the User

8. USING THE PIZZA FUNCTION

This appliance is equipped with a function specially developed for cooking

pizza with the special plate provided. This function is identified by the

symbol on the oven functions knob. To cook a pizza, proceed as described

below.

Set the oven functions knob on the

symbol and the thermostat knob

on the symbol.

Preheat with these settings until the

thermostat light goes out, then place

the pizza on the special plate using

the pizza shovel provided. It does not

normally take more than 3-4 minutes

to cook a pizza to perfection,

although this time may vary depending on the dough used or individual

taste.

8.1 Precautions for using the pizza plate

• Never use the pizza plate except as described above (for example,

never use it on gas or ceramic hobs, or on ovens not designed to take

this accessory).

• For conventional cooking operations, it is advisable to remove the

pizza plate and replace it with the bottom cover provided.

• If you like oil on your pizza, it is best to add it after removal from the

oven since oil stains on the pizza plate are unsightly and may reduce

its efficiency.

Never use any oven function if the pizza plate or cover is not in position.

8.2 To save energy

The pizza stone acts as a heat reservoir. This allows energy consumption

to be reduced, especially in cooking operations requiring medium-long

times. In these cases, simply switch the oven off 10-12 minutes before the

end of the cooking time. The heat gradually emitted by the refractory stone

will ensure that the cooking temperature is maintained.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Pas de commentaire

Smeg SE995XT-7 Manuel d'instructions Page 10