Smeg XXSC111P Manuel d'utilisateur télécharger pdf (Page 15)

Instructions for the User

8. USING THE PIZZA FUNCTION (ON SOME MODELS ONLY)

This appliance is equipped with a function specially developed for cooking

pizza. This function is identified by the symbol on the oven functions

knob. To cook a pizza, proceed as described below.

With the oven cold, remove the circular cover from the bottom of the

oven (fig. 1) and fit the pizza plate in its place (Fig. 2).

1) 2)

Press PT2 to switch the oven on, then use PT2 again to select the

function. The display will show the recommended temperature for cooking

pizza (280°C), (for the 2300W low energy consumption mode the

recommended cooking temperature is 260°C). The recommended

temperature can still be varied using PT1.

Preheat with these settings until the symbol (on DSP3) remains

constantly on, then place the pizza on the special plate. It does not

normally take more than 3-4 minutes to cook a pizza to perfection,

although this time may vary depending on the dough used or individual

taste.

8.1 Precautions for using the pizza plate

• Never use the pizza plate except as described above (for example,

never use it on gas or ceramic hobs, or on ovens not designed to take

this accessory).

• The pizza plate may be left in place while conventional cooking

operations are in progress. Simply place the cover over it, taking care

to fit it securely.

• Never use any oven function if the pizza plate or cover is not in

position.

• The appliance becomes very hot during use. Oven gloves should

always be worn.

• If you like oil on your pizza, it is best to add it after removal from the

oven since oil stains on the pizza plate are unsightly and may reduce

its efficiency.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Pas de commentaire

Smeg XXSC111P Manuel d'utilisateur Page 15