Smeg Dual Fuel Cooker A3-5 Manuel d'utilisateur télécharger pdf (Page 7)

Instructions for the installer

3. ADAPTATION TO DIFFERENT TYPES OF GAS

Before performing any cleaning or maintenance work, switch off the

power supply to the appliance.

The cooking hob of the cooker is preset for G20 natural gas at a

pressure of 20 mbar. In the case of functioning with other types of gas the

burner nozzles must be changed and the minimum flame adjusted on the

gas taps. Replace the burner nozzles as indicated in the table of the gas

to be used.

3.1 Changing nozzles

1. Extract the grids and remove all the caps and flame-spreader

crowns;

2. unscrew the burner nozzles with a 7 mm socket wrench;

3. proceed with replacing the burner nozzles in accordance with the

table for the gas in question.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Pas de commentaire

Smeg Dual Fuel Cooker A3-5 Manuel d'utilisateur Page 7