Smeg XXPTS725 Manuel d'utilisateur télécharger pdf (Page 4)

Instructions for the Installer

Fit the insulating gasket provided carefully around the outside edge of the hole made in

the top as shown below, pressing it down with your hands so that its entire surface fits

snugly. Follow the dimensions shown, depending on the model of hob to be installed,

bearing in mind that on both models the long front edge must be flush with the hole. Fix

the hob to the structure using the brackets A provided. Carefully trim off the excess

edge of the gasket B. The dimensions in the drawing below refer to the hole on the

inside edge of the gasket.

See right for the precise holes to be used when

securing the hob to the top correctly using the

brackets.

1 2 3 4 5 6 7 8 9 ... 14 15

Pas de commentaire

Smeg XXPTS725 Manuel d'utilisateur Page 4