Smeg FA550X Mode d'emploi télécharger pdf (Page 31)

WATER CONNECTION

Disconnect the appliance from the mains power

supply before starting operations.

• The ice maker and water circuit must be connected to a

water supply of potable and/or chemically purified water.

• The water connection must be carried out in compliance

with local regulations.

• The appliance is supplied with a water tube, 2.330 m. long,

already attached to the back of the product, and is provided

with a transition connector for connecting to the water

supply (internal bag).

• Remove the shipping tape from the gray coiled water tubing

on the rear of the appliance.

• Remove the protective cap from the end of the gray water

tubing.

• Connect the water tube (1) to the transition connector (2).

Finger tightening and then 1 to 2 additional turns should be

adequate.

• Connect the transition connector (2) to the household

water supply (3).

• Make sure that the water tube is not twisted.

• The appliance is pre-set for operation at pressures between

1.7 and 8.1 bar (25 and 117 PSI).

• Open the water tap. Check for and eliminate any leaks.

• The appliance does not require any adjustment or water

drain.

6gb33032.fm5 Page 23 Monday, May 23, 2005 2:17 PM

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37

Pas de commentaire

Smeg FA550X Mode d'emploi Page 31