Smeg AS 63 CS Manuel télécharger pdf (Page 9)

9 - EN

Auxiliary function

Buzzer Cancel Models Equiped

Yourmachinewillsendoutanbuzzerwarning

whentheprogramcomestoanend.Ifyou

donotwanttohearthisbuzzing,youneedto

pressthe“CancelAudioWarning”button.The

relevantLEDwilllightupwhenthisbuttonis

pressed and an audio warning will not be given

when the program comes to an end.

Warning indicators

C Warningindicatorsmaydiffer

according to the model of your machine.

Filter cleaning

AwarningLEDwilllightuptoremindfilter

cleaning after the program finishes.

C IfthefiltercleaningwarningLEDlights

upcontinuously,pleasereferto,“Solution

suggestionsforproblems”.

Water tank

AwarningLEDwilllightupattheendofthe

program or when the tank is full with water. The

machinestopsoperatingwhenthiswarningLED

lights up during a program running. To restart

the machine, please drain the water in the water

tank.Press“Start/Pause/Cancel”buttonto

start the program after you have emptied the

watertank.ThewarningLEDgoesoffandthe

program resumes operating.

Starting the Program

Press“Start/Pause/Cancel”buttontostartthe

program.“Start/Pause/Cancel”buttonwill

light up to indicate that the program has

started.

Progress of program

Progress of a running program is shown through

the program follow-up indicator.

Atthebeginningofeveryprogramstep,the

relevantindicatorLEDwilllightupandlightof

the completed step will turn off.

“Drying”:

-Dryinglevelwillbeilluminatedduringthewhole

dryingprocessuntilthedryingdegreereaches“

ReadytoIron“.

“ Ready to Iron “:

-Startstoilluminatewhenthedryingdegree

reaches“ReadytoIron“stepandremains

illuminated until the next step.

“ Ready to Wear “:

-Startstoilluminatewhenthedryingdegree

reaches“ ReadytoIron“stepandremains

illuminated until the next step.

“Final / Anti-creasing”:

-Illuminateswhentheprogramcomestoanend

and anti-creasing function is activated.

C IfmorethanoneLEDlightuporflash

concurrently, it means there is malfunctioning or

afailure(pleasesee,Solutionsuggestionsfor

problems).

Changing the program after the program

has started

Youcanusethisfeatureafteryourmachinehas

started to dry your clothes under higher or lower

temperatures.

Forexample;

Pressandholdthe“Start/Pause/Cancel”buttonfor

about3secondsto“Cancel”theprograminorder

toselect“ExtraDry”programinsteadof“IronDry”

program.

Selectthe“ExtraDry”programbyrotatingthe

program knob.

Press“Start/Pause/Cancel”buttontostartthe

program.

C The program which is selected first will go on

even if the program selection button is moved

and another program mode is selected while

themachineisoperating.Youmustcancelthe

ongoing program in order to change the drying

program.(See,Endingtheprogramthrough

canceling)

Adding/removing laundry in standby mode

Ifyouwanttoaddorremovelaundryinto/fromyour

machine after the drying program has started, put

themachineinto“Pause”modebypressingthe

“Start/Pause/Cancel”button.Dryingprocesswill

stop. Open the door at Pause position and close

it again after adding or taking out laundry. Press

“Start/Pause/Cancel”buttontostarttheprogram.

C Anylaundryaddedafterthedrying

process was started may cause the already

dried clothes in the machine intermingle with wet

clothes and the result will be wet laundry after the

drying process is over.

C Itisrecommendedtoaddlaundrybefore

the program is started since it will increase the

program time and energy consumption.

Child-proof lock

There is a childproof lock to prevent any program

interruption due to the pressing of keys while

the program is on. The loading door and all

keysexceptthe“On/Off”keyonthepanelare

deactivated when the child-proof lock is active.

Inordertoactivatethechildprooflock,pressonthe

“Start/Pause/Cancel”and“Cancelaudiowarning”

buttonssimultaneouslyfor3seconds.

To start a new program after

the program is over or to

interrupt the program, the

childproof lock should be

deactivated. To deactivate

the childproof lock, press

thesamebuttonsfor3sec.

C 2 beeps when activating and 1 beep

when deactivating the child-proof lock is heard.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Smeg AS 63 CS Manuel Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Séchoirs à tambour Smeg AS 63 CS