Smeg Integrated Washer WDI16BA Manuel d'utilisateur télécharger pdf (Page 14)

Display

The display shows the following information:

1. time remaining for the sele cted programm e, gi ven

in hours/minutes.

2. delayed start (for models featuring this option).

Given in hours/minutes. When the time remaining

before the programme starts is less than 60 minutes,

this information is given in minutes/seconds.

3. spin speed

4. drying times given in hours/minutes

5. cycle pause - flashing STOP

6. end of cycle - END

7. error codes

To find out which of the first 4 pieces of information are

shown on the display, check which of the LED's, C, D, E, F or

S (the latter for models featuring the delayed start option) is

lit.

Select spin speed button or

stop with tub full

Press the button repeatedly to select the required spin

speed. The following spin speeds are available:

• 0000: spin disabled and stop with tub full. The ma-

chine does not perform the final spin and ends the

washing programme with water in the tub. To drain

the water, see the explanations shown in paragraph

5.13

• from 600 rpm to the maximum speed indicated for

the model: for cotton and coloured programmes,

speed increases by 100 rpm starting from 600 rpm

up to the maximum speed indicated for the model

• from 600 to 900 rpm: for synthetics, delicates and

w oollens programmes, speed increases by 100 rpm

starting from 600 rpm up to 900 rpm.

Select programme and dry-

ing time button

Press the button repeatedly to select drying times up to a

maximum of 2 hours (120 minutes), with increments of 10

minutes, starting from 20 minutes. The type of drying cycle

can be selected with one of the following LED's:

• Delicate drying programme (letter E in this section):

drying temperature 60°C, for synthetic and delicate

garments.

• Intensive drying programme (letter F in this section):

drying temperature 90°C, for cotton and coloured

garments.

Select programme and dry-

ing time button enabled

LED

This LED lights up when drying times are being selected and

during the drying phase.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

Commentaires sur ces manuels

Pas de commentaire

Smeg Integrated Washer WDI16BA Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Rondelles Smeg Integrated Washer WDI16BA