Smeg WM40T-1 Manuel d'utilisateur

THE CONTENTS SECTION 1:BEFORE USING • Safety warnings • Recommendations SECTION 2:INSTAL

1-Cotton 90°C 2- Cotton 60°C with prewash 3- Cotton 60°C 4- Cotton 40°C 5- Eco wash 6- Q

• Pull the textiles like trousers,knitted fabric,t-shirt and sweat shirt inside out. • W

• You can use fluid detergents in all programs without pre-washing. For this, mount the f

• The door will be unlocked in approximately two minutes after the program ends.You can o

MAX DRY LOAD CAPACITY (kg) PROGRAM DETERGENT COMPART. ADDITIONAL FUNCTION BUTTON WM40T-1 TYPE OF LAUNDRY EXPLANA

MAX DRY LOAD CAPACITY (kg) PROGRAM DETERGENT COMPART. ADDITIONAL FUNCTION BUTTON WM40T-1 TYPE OF LAUNDRY EXPLANATI

WARNING! Danger of being scalded! Since the water inside the pump maybe hot, wa

SIPHON PLUG Pull out the detrgent drawer. Remove the siphon plug and clean the residues of

SECTION 7:PRACTICAL INFORMATION Alcoholic beverages: The stain point, should first

• Remove the water inlet hose. • Remove the filters found on the water inlet valves by u

SECTION 1:BEFORE USING SAFETY WARNINGS • Do not use a multiple socket or extension c

Mould: Mould stains should be cleaned as soon as possible. The stain

FAILURE PROBABLE CAUSE METHODS OF ELIMINATION It is unplugged. Insert the plug into the so

FAILURE PROBABLE CAUSE METHODS OF ELIMINATION There is a small amount of clothes in the de

FAILURE PROBABLE CAUSE METHODS OF ELIMINATION Clothes exceeding the maximum capacity ha

FAILURE PROBABLE CAUSE METHODS OF ELIMINATION The spining process is not done or starts w

FAILURE CODE FAILURE INDICATOR PROBABLE FAILURE THE PROCESS TO BE DONE Err 02 The program

FAILURE CODE FAILURE INDICATOR PROBABLE FAILURE THE PROCESS TO BE DONE Err 05 The start/pa

SECTION 10: INTERNATIONAL WASHING SIGNS Washing temparature. Do not wash (hand was

52010077

• If you will not use your machine for a long time, unplug your machine, close the water

• You can adjust the balance of your machine from its feet. • First, loosen the plastic

Cold water inlet WATER DRAIN CONNECTION • Be sure that water inlet hoses are not f

SECTION 3:TECHNICAL SPECIFICATIONS WM40T-1 Maximum dry laundry capacity (kg) 5 Recommen

SECTION 4:CONTROL PANEL WM40T-1 1 2 3

START/PAUSE BUTTON Used to start a selected program or pause during run

WARNING! Functions vary depending on the model you have chosen.If you