Smeg SUK92CMX5 Manuel de service télécharger pdf (Page 5)

Instructions for the user

7. FRONT CONTROL PANEL

All the cooker controls and commands are on the front panel.

MAIN OVEN THERMOSTAT KNOB FRONT LEFT-HAND COOKING ZONE

MAIN OVEN FUNCTION KNOB REAR LEFT-HAND COOKING ZONE

AUXILIARY OVEN THERMOSTAT KNOB CENTRAL COOKING ZONE

FRONT RIGHT-HAND COOKING ZONE

Before using the oven make sure that the symbol ; appears on the display. See paragraph “10.

ELECTRONIC PROGRAMMER”.

COOKING HOB CONTROL KNOB

Standard heating

The circle next to each knob indicates the cooking zone it controls. To heat,

push and turn the knob to the desired position. Adjustment is continuous so that

the appliance also operates at any intermediate value. To turn off, return the

knob to 0.

Double heating

The circle next to each knob indicates the cooking zone it

controls. To heat the inner cooking zone, push and turn the

knob to the desired position.

To heat both the inner and outer cooking zones, turn the

knob to / ; and then release. The knob will thus return to

MAX. To adjust heating intensity, rotate the knob

anticlockwise to the desired position 0. To return to heating of

the inner cooking zone only, set the knob back to and then

turn to the desired position. To switch off, return knob to 0.

MAIN OVEN THERMOSTAT KNOB

Selection of cooking temperature is carried out by turning the knob clockwise to

the required temperature, between 50° and 260°C.

The warning light will come on when the oven is heating up. When it goes out it

means that the required temperature has been reached. Regular flashing

means that oven temperature is being constantly maintained at the

programmed level.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Pas de commentaire

Smeg SUK92CMX5 Manuel de service Page 5