Smeg DI607C Manuel d'instructions télécharger pdf (Page 31)

User instructions

6. Troubleshooting

The dishwasher is capable of signalling a number of faults through the

simultaneous illumination of several indicator lights, with the following

meanings:

FAULT DESCRIPTION

Water heating malfunction

The water is not heated or the heating parameters

are not correct. Repeat the washing program; if the

problem persists, contact the after-sales service.

Water temperature monitoring malfunction

Interrupt the program and switch off the dishwasher.

Switch the dishwasher back on, program it again and

start the washing cycle. If the problem persists,

contact the after-sales service.

Water intake malfunction

The appliance does not take in water or does not do

so correctly. Check that the water connections are

correct, the water intake tap is turned on and the filter

is not fouled. If the problem persists, contact the

after-sales service.

Water pump-out malfunction

The appliance does not pump out the water or does

not do so correctly. Check that the drain hose is not

kinked or crushed and that the siphon and filter are

not fouled. If the problem persists, contact the after-

sales service.

Turbine flow-regulator malfunction

(for the relevant models only)

The appliance is not able to "measure" the amount of

water loaded accurately. Interrupt the program and

switch off the dishwasher. Switch the dishwasher

back on, program it again and start the washing

cycle. If the problem persists, contact the after-sales

service.

Water intake system malfunction

Contact the after-sales service.

Light off Light on Light flashing

     GI     

1 2 ... 26 27 28 29 30 31 32 33 34

Pas de commentaire

Smeg DI607C Manuel d'instructions Page 31