Smeg LSA653E Manuel d'utilisateur télécharger pdf (Page 7)

User instructions



CHANGING A PROGRAM

To change the running program it is necessary:

• to interrupt the running program (see “

NTERRUPTION A PROGRAM

”);

• select the new program;

• start the program (see “

TARTING THE PROGRAM

”).

ANNULLING A PROGRAM

To annul the program, keep the

START/PAUSE

button

(2)

pressed until

the program is interrupted (light on and confirmation beep).

Press button

(2)

again and keep it

pressed until the

lights 4

and

(marked

"end") come on.

The water in the tank will be pumped out and the program will end at the

point where it was interrupted.

In case that the door is opened during the operation, to the next door

closing it is going to be necessary to start the program as shown in

paragraph “

TARTING THE PROGRAM

”. The program will resume from the

point in which it was interrupted.

In case that the tub temperature is higher than 50°C the program

will start about 30 seconds later.

HALF LOAD WASH SETTING (certain models only)

(available in all programs except the soak program)

This function is ideal for small loads and saves

water and electricity. It is controlled by the

HALF

LOAD

button

(5)

and allows washing in the upper

basket only.

IMPORTANT:

at the end of the program remember

to deactivate the function

to ensure the next

wash is not also carried out in half load mode

mistake

1 2 3 4 5 6 7 8 9 10 11 12 ... 38 39

Commentaires sur ces manuels

Pas de commentaire

Smeg LSA653E Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Smeg LSA653E