Smeg SI7643B Manuel d'utilisateur télécharger pdf (Page 9)

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch the end of the control bar on

the right ( comes on). Immediately

touch a desired heat setting. After 3

seconds

comes on.

To deactivate the function: change the

heat setting.

Power function

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

zone automatically sets back to the

highest heat setting.

Refer to “Technical information”

chapter.

To activate the function for a cooking

zone: touch the end of the control bar on

the right.

comes on.

To deactivate the function: change the

heat setting.

Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of the

timer to set the time (00 - 99 minutes).

When the indicator of the cooking zone

starts to flash slowly the time counts

down.

To see the remaining time: set the

cooking zone with . The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

To change the time: set the cooking zone

with . Touch or .

To deactivate the function: set the

cooking zone with and touch .

The remaining time counts back to 00.

The indicator of the cooking zone goes

out.

When the time comes to an

end, the sound operates and

00 flashes. The cooking zone

deactivates.

To stop the sound: touch .

CountUp Timer (The count up timer)

You can use this function to monitor how

long the cooking zone operates.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of the

timer. comes on. When the indicator of

the cooking zone starts to flash slowly the

time counts up. The display switches

between and counted time (minutes).

To see how long the cooking zone

operates: set the cooking zone with

. The indicator of the cooking zone

starts to flash quickly. The display shows

how long the zone operates.

To deactivate the function: set the

cooking zone with

and touch or

. The indicator of the cooking zone goes

out.

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and the

cooking zones do not operate. The heat

setting display shows .

To activate the function: touch .

Touch

or of the timer to set the time.

When the time comes to an end, the

sound operates and 00 flashes.

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

Commentaires sur ces manuels

Pas de commentaire