Smeg ML60 Manuel d'instructions télécharger pdf (Page 3)

Instructions for the installer

2. INSTALLING THE PARTS

2.1 Installing the tap

Prepare the area where the tap is to be installed then proceed as

follows:

• Insert the tap (2) into the housing hole (1), making sure that the o-

ring seal (4) is in place between the tap and the sink contact

surface.

• Underneath the sink, insert the plastic below-sink reinforcement (5),

together with the rubber seal (6).

• Fix the tap in place by inserting the mounting flange (7) and the

hold-down nut (8); check that the tap is in the correct position in

relation to the sink and tighten the nut using a suitable spanner or

similar tool.

1 2 3 4 5 6 7 8 ... 11 12

Pas de commentaire

Smeg ML60 Manuel d'instructions Page 3