Smeg WDF16BA1 Instructions d'exploitation télécharger pdf (Page 6)

For Great Britain only

Warning: this appliance must be earthed.

Fuse replacement

If the mains lead of this appliance is fitted with a

BS 1363A 13amp fused plug, to change a fuse in

this type of plug use an A.S.T.A. approved fuse to

BS 1362 type and proceed as follows:

1. Remove the fuse cover (A) and fuse (B)

2. Fit replacement 13A fuse into fuse cover

3. Refit both into plug

Important:

The fuse cover must be refitted when changing a

fuse and if the fuse cover is lost the plug must not

be used until a correct replacement is fitted.

Correct replacement are identified by the colour

insert or the colour embossed in words on the

base of the plug.

Replacement fuse covers are available from your

local electrical store.

If the appliance is provided with a plugless supply cord:

• It is necessary to install in the fixed wiring an all-pole disconnection device having a gap

between contacts of at least 3,5mm. After installation the disconnection device has to be easy

to reach.

• The connection to the mains must be carried out by a qualified technician in accordance to the

scheme shown below and the regulations in force

= brown

= blue

= yellow-green

• In the event of damage to the supply cord, it has to be replaced by the manufacturer or an

authorized technical service center in order to avoid any risk.

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

Pas de commentaire

Smeg WDF16BA1 Instructions d'exploitation Page 6