Smeg Party Cooler PC45X Manuel d'utilisateur télécharger pdf (Page 4)

1. Before using the appliance

Please read these instructions carefully. They will

give you important information on the

installation, operation and maintenance of the

appliance.

If you throw out an old appliance, it is important

to destroy the locking mechanism (not all

models).

Never connect damaged appliances to the

mains. All kinds of service and repair work

should be carried out by authorised service men,

contact your dealer for further information.

The unit is only to be used for the cooling of

beverages. Bottles may burst when being cooled

at very low temperatures.

Do not place inflammable liquids or gasses in

the appliance owing to risk of explosion.

The appliance should not be exposed to

direct sunlight or placed up against a heat

source.

The appliance must be placed on an even,

horizontal and stable surface.

When moving your appliance, do not seize

hold of it under the bottom, as there might be

sharp edges.

2. Placing

3. Electrical connection

The appliance observes the following current

EU directives:

Low Voltage 73/23 EG.

Electromagnetic Compatibility 89/336 EEC.

The appliance must be protected extra

according to the power regulations in order to

protect the user against dangerous electric

shocks in the case of defects.

If the socket is for a three-pin plug, a three-pin

plug is used and the wire with yellow/green

insulation must be connected to the earth

terminal (marked ).

If the socket is for a two-pin plug, a two-pin plug

is used. If you assemble this one yourself, the

wire with yellow/green insulation must be cut off

as close as possible to the place where it enters

the plug.

When changing the power cord, it must be

replaced by a power cord of corresponding

type.

In no circumstances cut in or remove parts from

the electric circuit.

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Smeg Party Cooler PC45X Manuel d'utilisateur Page 4

Commentaires sur ces manuels