Smeg CMSCU451S Manuel d'instructions télécharger pdf (Page 19)

• DESCALE NO

• TEMPERATURE MEDIUM

• OFF AFTER 1 HOUR

• WATER HARDNESS 4

• DEFAULT VALUES NO

Setting the clock

To set the clock, proceed as follows:

• Press the MENU button (C2) (the light over the button

comes on) then press the NEXT button (C3) repeatedly until

the appliance displays: “CLOCK… 00:00”.

• Press the CHANGE button (C4) to set the clock.

(If you hold the CHANGE button (C4) down, the time is

changed rapidly).

• Press the OK button (C5) to conrm.

• Press the MENU button (C2) to exit programming mode or

NEXT (C3) to change other parameters.

Setting auto-start time

This function programmes the time the machine will come on

automatically to be ready for use.

• Make sure the clock on the appliance is set as described in

the previous section.

• Press the MENU button (C2) (the light over the button

comes on) then press the NEXT button (C3) repeatedly until

the appliance displays: “START TIME… 00:00”.

• Press the CHANGE button (C4) to set the auto-start time.

(If you hold the CHANGE button (C4) down, the time is

changed rapidly).

• Press the OK button to conrm the value;

• Press the NEXT button (C3) once and the appliance displays

the message: “AUTO-START NO”.

Press the CHANGE button (C4) to modify the function (the

machine displays “AUTO-START YES”).

• Press the OK button (C5) to activate auto-start;

NOTE: when the machine is o and an auto-start time has been

set, the symbol appears alongside the time on the unlit

display.

• Press the MENU button (C2) to exit programming mode or

NEXT (C3) to change other parameters.

Descaling

Important! Before descaling, make sure the water

softener lter has been removed.

Important! Descaler contains acids which may irri-

tate the skin and eyes. It is vital to respect the manufacturer’s

safety warnings given on the descaler pack and the warnings

relating to the procedure to follow in the event of contact with

the skin and eyes.

N:B:: Use the descaler recommended by the manufac-

turer only. Use of other descalers invalidates the guarantee.

Failure to descale the appliance as described also invalidates the

guarantee.

Over time, constant heating up of the water used to make the

coee leads to limescale building up in the inner circuits of the

appliance.

When “DESCALE” is displayed, the machine requires descaling.

Proceed as follows:

• press the MENU button (C2) (the light over the button

comes on) then press the NEXT (C3) button repeatedly until

the appliance displays “DESCALE NO”;

• press the CHANGE button (C4) and the appliance displays

“DESCALE YES”

• press the OK button (C5) to start the descale programme;

• empty the water tank, pour the contents of the descaler

bottle into the tank respecting the instructions given on

the descaler pack, then add water.

When descaling subsequently, use descaler of the same

type and brand as supplied (available from the manufac-

turer’s authorised Customer Services) or a descaler recom-

mended by Customer Services. Always follow the instruc-

tions on the pack.

• attach the hot water spout to the nozzle;

• place a container with a minimum capacity of 2 litres /

67.63 oz under the hot water spout (g. 3);

• press the OK button (C5). Descaler ows out of the hot wa-

ter spout into the container below.

“APPLIANCE IN DESCALE” is displayed;

• the descale programme automatically performs a series of

deliveries and pauses to remove limescale deposits from

inside the machine.

• After about 30 minutes, the appliance displays “RINSING

FILL TANK”.

The appliance must now be rinsed through to eliminate residues

of descaling solution from inside the appliance. Proceed as fol-

lows:

• Empty the water tank, rinse and ll with clean water.

• Replace the tank;

• Empty the full container and put back under the hot water

spout;

• Press the OK button (C5). Hot water ows out of the spout

into the container below and the appliance displays “RINS-

ING”;

• When the water tank is empty, the appliance displays the

message “RINSING COMPLETE... PRESS OK”;

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Smeg CMSCU451S Manuel d'instructions Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Cafetières Smeg CMSCU451S