Smeg A2C-6 Manuel de service télécharger pdf (Page 4)

Instructions for the installer

2. INSTALLATION OF THE APPLIANCE

It can be placed against walls higher than the hob, at a distance of at

least 50 mm from the side of the appliance, as shown in the drawings A

and B relating to the installation classes. Wall units or extractor hoods

located above the hob must be at least 750 mm away from it.

A B

Built-in appliance Free-standing installation

2.1 Electrical connection

Make sure that the power line voltage matches the specifications

indicated on the rating plate located inside the storage compartment.

This rating plate must never be removed.

On the power line, install an omnipolar cut-off device with contact cut-off

distance greater than or equal to 3 mm, located in an easily accessible

position near the unit.

1 2 3 4 5 6 7 8 9 ... 32 33

Pas de commentaire

Smeg A2C-6 Manuel de service Page 4