Smeg SUK61MX8 Manuel de service télécharger pdf (Page 35)

Instructions for the installer

12. ADAPTATION TO DIFFERENT TYPES OF GAS

BEFORE PERFORMING ANY OPERATIONS, SWITCH OFF THE POWER SUPPLY TO THE

APPLIANCE.

Appliance set for gas: NATURAL G20 (2H) pressure 20 mbar (see label on product)

In the case of operation with other types of gas, the burner nozzles must be changed and the minimum

flame adjusted on the gas taps.

To change the nozzles, proceed as described in the following paragraphs.

12.1 Replacement of nozzles on the hob

1 Remove the pan stands, and remove all the burner

caps and flame-spreader crowns to access the burner

casings.

2 Unscrew the nozzles using a 7 mm socket wrench.

3 Replace the burner nozzles according to the type of gas

to be used (see 12.3 Burner and nozzle characteristics

table).

4 Replace the burners in the correct position.

12.2 Arrangement of burners

Burner

Auxiliary

Semi-rapid

Rapid

Ultra-rapid

1 2 ... 30 31 32 33 34 35 36

Pas de commentaire

Smeg SUK61MX8 Manuel de service Page 35