Smeg BLV1R Manuel d'utilisateur télécharger pdf (Page 37)

If the dishes fail to dry or remain dull, check that:

• there is rinse aid inside the special container;

• the rinse aid dispenser setting is correct;

• the detergent used is of good quality and has not lost its

effectiveness (for example, through incorrect storage, with the box

left open).

If the dishes show signs of streaking, staining, etc., check that:

• the rinse aid dispenser setting is not too high.

If there are visible traces of rust inside the tank:

• the tank is made of steel, and therefore any rust marks are due to

external elements (fragments of rust from the water pipes, pots,

cutlery, etc.). Special products are commercially available to remove

such marks;

• check that the amount of detergent being used is correct. Certain

detergents can be more corrosive than others.

• check that the cap of the salt container is securely closed, and that

the water softening setting is correct.

If after following the above troubleshooting instructions the problem

persists, call the nearest After-Sales Centre.

WARNING: any operations performed on the appliance by

unauthorised persons are not covered by the warranty and shall be

paid for by the user.

TECHNICAL DATA

Width

597

599 mm

Depth measured flush with the

outer edge of the control panel

600 mm

Height

From 850 mm to 870 mm

Capacity

14 Standard place settings

Water supply pressure

min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)

Electrical characteristics

See rating plate

User instructions

1 2 ... 32 33 34 35 36 37

Pas de commentaire

Smeg BLV1R Manuel d'utilisateur Page 37