User instructions
16
• Do not use table salt, as it contains insoluble substances which,
over time, may damage the water softening system.
• The salt container should be refilled before starting the wash
program. This way, the excess saline solution will be immediately
removed by the water; prolonged presence of salt water inside the
tank may lead to corrosion.
Be careful not to confuse the salt and detergent packages; adding
detergent to the salt container will damage the water softening system.
ADJUSTING THE WATER SOFTENING SYSTEM
The dishwasher is equipped with a device which allows the softener
setting to be varied to suit the hardness of the mains water. Adjustment
is made using the PROGRAM SELECTION BUTTON (3).
● Hold the button down for more than 15 seconds. The
HARDNESS ADJUSTMENT INDICATOR LIGHT (4) flashes, while the
SELECTED PROGRAM INDICATOR LIGHTS (2) show the current
setting.
● Each press of the button changes the selection, following the
sequence in the table below.
>
After adjusting or displaying the current setting, simply do not touch the
button for a few seconds; the dishwasher will automatically return to
standard mode, quitting the adjustment mode.
Commentaires sur ces manuels