Smeg PLA8743X Manuel d'instructions télécharger pdf (Page 41)

Rev 0.0 19

USER INSTRUCTIONS

4.2.1 Adding the rinse-aid

The rinse aid helps the dishes dry faster and prevents the formation of scale de-

posits and staining; it is automatically added to the water during the ﬁ nal rinse

cycle, from the container situated on the inner side of the door .

To add rinse aid:

Open the door.

Rotate the container cover (ref. A ﬁ g. 4-04) anticlockwise by ¼ of a turn and

remove it.

Add the rinse aid until the container is full (approximately 140 ml). The optical

level indicator (ref. B ﬁ g. 4-04), on the side of the cap should be completely

obscured. Reﬁ ll the rinse aid when the optical level indicator becomes clear

again, or when the rinse aid warning light illuminates (see “Description of

controls” manual).

Replace the cover (ref. A ﬁ g. 4-04) by turning it in a clockwise direction until

it is fully closed.

Use a cloth to remove any spillage of rinse aid which might lead to the forma-

tion of excess foam.

4.2.2 Adjusting the rinse-aid dispenser setting

The rinse-aid dispenser can be set to one of 6 different levels. The dishwasher

is factory set for medium water hardness (selector set to “3”). To change the

setting, turn the dispenser selector (ref. c ﬁ g. 4-04) to the desired position: the

amount of rinse-aid dispensed is proportional to the position of this selector.

Make sure that the minimum amount of rinse-aid (selector turned to “1”) is

approximately 1 ml and the maximum amount (selector turned to “6”) is ap-

proximately 6 ml.

•

Fig. 4-04

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 101 102

Pas de commentaire

Smeg PLA8743X Manuel d'instructions Page 41