Smeg ST0904 Manuel d'instructions télécharger pdf (Page 21)

User instructions

ADDING THE RINSE AID

The rinse aid helps the dishes dry faster

and prevents the formation of scale

deposits and staining; it is automatically

added to the water during the final rinse

cycle, from the container situated on the

inner side of the door.

To add rinse aid:

• Open the door.

• Open the door S.

• Add the rinse aid until the container

is full (approximately 140 cc).

• The optical level indicator O on the side of the cap should be

completely obscured. Refill the rinse aid when the optical level

indicator becomes clear again, or when the rinse aid warning light

illuminates.

• Close the door S.

• Use a cloth to remove any spillage of rinse aid which might lead to

the formation of excess foam.

ADJUSTING THE RINSE AID DISPENSER SETTING

The dishwasher is factory set for medium water hardness. However it

possible to change the setting by turning the dispenser’s selector to the

desired position: the amount of rinse aid dispensed is proportional to the

selector position.

• The amount of rinse aid must be increased if the washed dishes

appear dull or feature circular stains.

• If, on the other hand, the dishes are sticky or have white streaks, it

is necessary to reduce the rinse aid setting.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Pas de commentaire

Smeg ST0904 Manuel d'instructions Page 21