Smeg STL827A Manuel d'instructions télécharger pdf (Page 39)

EN-MODELS WITH AUTOMATIC OPENING

Models with automatic opening have a string (accessible from the front even when the

door panel is fitted) which allows the door to be opened when the appliance is not

receiving electrical power, by just pulling it down .

Before fitting the door panel, the electric opening

button should be partially extracted (by turning it

anticlockwise) .

The dishwasher is fitted with a “child lock”; if this is activated, to

open the door keep the door depressed until the 3rd beep is

heard, then release it immediately. If the door is released before

the 3rd beep, or not immediately after it, it will not open and the

operation will have to be repeated .

TO OPEN PRESS HERE

WARNING: on occasion the door may fail to open in response to light pressure; if

so, press again with gradually increasing force until the beep is heard, then

release.

Fine adjustment of the button must be carried out with the door panel

fitted, using a straight head screwdriver on the knurling around the

edge of the button. (Anticlockwise rotation = button towards outside

of door; Clockwise rotation = button towards inside of door).

To open the door press the centre of the door upwards until the beep

is heard, then release it. If the door fails to open, press in the point

shown again until the beep is heard, then release it.

1 2 ... 34 35 36 37 38 39

Pas de commentaire

Smeg STL827A Manuel d'instructions Page 39