Smeg FI360LX Manuel d'utilisateur Page 26

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 64
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 25
Problem Possible cause Solution
The door is not closed cor‐
rectly.
Refer to "Closing the door".
The FastFreeze is switch‐
ed on.
Refer to "FastFreeze function".
There is too much frost and
ice.
The door is not closed cor‐
rectly or the gasket is de‐
formed/dirty.
Refer to "Closing the door".
The compressor does not
start immediately after
pressing the FastFreeze, or
after changing the tempera‐
ture.
This is normal, no error
has occurred.
The compressor starts after a
period of time.
Water flows on the floor. The melting water outlet is
not connected to the evap‐
orative tray above the
compressor.
Attach the melting water outlet
to the evaporative tray.
Temperature cannot be set. The FastFreeze function
or Shopping function is
switched on.
Switch off FastFreeze or
Shopping manually, or wait
until the function resets auto‐
matically to set the tempera‐
ture. Refer to "Fast‐
Freezefunction" or "Shopping
function".
dEMo appears on the dis‐
play.
The appliance is in dem‐
onstration mode.
Keep the OK pressed for ap‐
proximately 10 seconds until a
long sound is heard and dis‐
play shuts off for a short time.
The temperature in the ap‐
pliance is too low/too high.
The temperature regulator
is not set correctly.
Set a higher/lower tempera‐
ture.
The food products' tem‐
perature is too high.
Let the food products temper‐
ature decrease to room tem‐
perature before storage.
The door has been
opened often.
Open the door only if necessa‐
ry.
The FastFreeze function
or Shopping function is
switched on.
Refer to "FastFreeze function"
or "Shopping function".
There is no cold air circu‐
lation in the appliance.
Make sure that there is cold
air circulation in the appliance.
26
Vue de la page 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 63 64

Commentaires sur ces manuels

Pas de commentaire