Smeg S3F072P Manuel d'utilisateur télécharger pdf (Page 23)

Problem Possible cause Solution

The temperature in the ap‐

pliance is too high.

Refer to "High temperature

alarm".

Power indicator light is flash‐

ing.

An error has occurred in

measuring the tempera‐

ture.

Contact a qualified electrician

or contact the nearest Author‐

ised Service Centre.

The appliance is not work‐

ing properly.

Contact a qualified electrician

or contact the nearest Author‐

ised Service Centre.

The temperature in the ap‐

pliance is too high.

Contact a qualified electrician

or contact the nearest Author‐

ised Service Centre.

The compressor operates

continually.

Temperature is set incor‐

rectly.

Refer to "Operation".

Many food products were

put in at the same time.

Wait some hours and then

check the temperature again.

The room temperature is

too high.

Refer to climate class chart on

the rating plate.

Food products placed in

the appliance were too

warm.

Allow food products to cool to

room temperature before stor‐

ing.

The door is not closed cor‐

rectly.

Refer to "Closing the door".

The "Super" is switched

on.

Refer to "Super function".

There is too much frost and

ice.

The door is not closed cor‐

rectly or the gasket is de‐

formed/dirty.

Refer to "Closing the door".

The water drainage plug is

not correctly positioned.

Position the water drainage

plug in the correct way.

Food products are not

wrapped properly.

Wrap the food products better.

Temperature is set incor‐

rectly.

Refer to "Operation" .

The compressor does not

start immediately after

pressing the "Super", or af‐

ter changing the tempera‐

ture.

This is normal, no error

has occurred.

The compressor starts after a

period of time.

23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

Commentaires sur ces manuels

Pas de commentaire