Smeg S3F072P Manuel d'utilisateur télécharger pdf (Page 10)

Problem Possible cause Solution

Audible or visual alarm is on. The cabinet has been recent-

ly switched on or the temper-

ature is still too high.

Refer to "Door Open

Alarm"or "High Temperature

Alarm".

The temperature in the appli-

ance is too high.

Refer to "Door Open

Alarm"or "High Temperature

Alarm".

Power indicator light is flash-

ing.

An error has occurred in

measuring the temperature.

Contact a qualified electrician

or contact the nearest Au-

thorized Service Centre.

The appliance is not working

properly.

Contact a qualified electrician

or contact the nearest Au-

thorized Service Centre.

The temperature in the appli-

ance is too high.

Contact a qualified electrician

or contact the nearest Au-

thorized Service Centre.

The compressor operates

continually.

Temperature is set incorrect-

ly.

Refer to "Operation" chapter.

Many food products to be

frozen were put in at the

same time.

Wait some hours and then

check the temperature again.

The room temperature is too

high.

Refer to climate class chart

on the rating plate.

Food products placed in the

appliance were too warm.

Allow food products to cool

to room temperature before

storing.

The door is not closed cor-

rectly.

Refer to "Closing the door".

There is too much frost and

ice.

The door is not closed cor-

rectly or the gasket is de-

formed/dirty.

Refer to "Closing the door".

The water drainage plug is

not correctly positioned.

Position the water drainage

plug in the correct way.

Food products are not wrap-

ped properly.

Wrap the food products bet-

ter.

Temperature is set incorrect-

ly.

Refer to "Operation" chapter.

The temperature in the appli-

ance is too low/too high.

The temperature regulator is

not set correctly.

Set a higher/lower tempera-

ture.

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Commentaires sur ces manuels

Pas de commentaire