Smeg S7298CFD2P Manuel d'utilisateur Page 8

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 64
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 7
Ice-cube production
This appliance is equipped with one or
more trays for the production of ice-cubes.
Do not use metallic instruments
to remove the trays from the
freezer.
1. Fill these trays with water
2. Put the ice trays in the freezer
compartment.
Temperature indicator
For proper storage of food the refrigerator is
equipped with the temperature indicator.
The symbol on the side wall of the
appliance indicates the coldest area in the
refrigerator.
If “OK” is displayed (A), put fresh food into
area indicated by symbol, if not (B), adjust
the temperature controller to a colder
setting and wait 12 hours before checking
the temperature indicator again.
OK
OK
A
B
After putting fresh food into the
appliance or after opening the
door repeatedly or for a long
period, it is normal for the
indicator not to show "OK"; wait
at least 12 hours before
readjusting the temperature
controller.
Fan Function
The refrigerator compartment is equipped
with a device that allows for rapid cooling of
foods and more uniform temperature in the
compartment.
This device activates by itself when needed,
for example for a quick temperature
recovering after door opening or when the
ambient temperature is high.
It is possible to switch on the device
manually when needed (refer to "Fan
function").
The fan stops when the door is
open and restarts immediately
after the door closing.
HINTS AND TIPS
Normal operating sounds
The following sounds are normal during
operation:
A faint gurgling and bubbling sound from
coils sound when refrigerant is pumped.
A whirring and pulsating sound from the
compressor when refrigerant is pumped.
A sudden cracking noise from inside
appliance caused by thermic dilatation (a
natural and not dangerous physical
phenomenon).
A faint click noise from the temperature
regulator when the compressor switches
on or off.
8
Vue de la page 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 63 64

Commentaires sur ces manuels

Pas de commentaire