Smeg S3C172FP Manuel d'utilisateur télécharger pdf (Page 25)

Problem Possible cause Solution

The compressor operates

continually.

Temperature is set incor-

rectly.

Refer to "Operation".

Many food products were

put in at the same time.

Wait some hours and then

check the temperature again.

The room temperature is

too high.

Refer to climate class chart on

the rating plate.

Food products placed in

the appliance were too

warm.

Allow food products to cool to

room temperature before stor-

ing.

The FastFreeze is switched

on.

Refer to "FastFreeze function".

There is too much frost and

ice.

The door is not closed cor-

rectly or the gasket is de-

formed/dirty.

Refer to "Closing the door".

The water drainage plug is

not correctly positioned.

Position the water drainage

plug in the correct way.

Food products are not

wrapped properly.

Wrap the food products better.

Temperature is set incor-

rectly.

Refer to "Operation" .

The compressor does not

start immediately after press-

ing the FastFreeze, or after

changing the temperature.

This is normal, no error has

occurred.

The compressor starts after a

period of time.

Water flows on the rear plate

of the refrigerator.

During the automatic de-

frosting process, frost

melts on the rear plate.

This is correct.

Water flows inside the refrig-

erator.

The water outlet is clog-

ged.

Clean the water outlet.

Food products prevent that

water flows into the water

collector.

Make sure that food products

do not touch the rear plate.

Water flows on the floor. The melting water outlet is

not connected to the evap-

orative tray above the com-

pressor.

Attach the melting water outlet

to the evaporative tray.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Smeg S3C172FP Manuel d'utilisateur Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs-congélateurs Smeg S3C172FP