Smeg CIR60X3 Manuel d'instructions télécharger pdf (Page 12)

Instructions for the installer

5.2 Regulation for LPG

Loosen screw A and push support B all the way. Use a double head

wrench to remove nozzle C and assemble the suitable one, following the

instructions indicated in the reference charts, with respect to the type of

gas to use. The screwing torque of the nozzle should never exceed

3 Nm. Reposition support B so that nozzle C is covered perfectly.

Place the burner on its support and ignite it. Move the Venturi tube D to

regulate the air flow until the flame is stable and burns regularly, then

secure the tube by means of screw A.

LPG – 2.75 kPa

Burner

Nominal gas

consumption

(MJ/h)

Injector

(mm)

Auxiliary (1) 4.8 0.60

Semi rapid (2) 6.0 0.68

Rapid (3) 9.5 0.85

Rapid (4) 12.5 0.95

Wok (5) 15.0 1.05

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Pas de commentaire

Smeg CIR60X3 Manuel d'instructions Page 12