Smeg ER12550NL Manuel d'utilisateur télécharger pdf (Page 13)

Instructions for the user

7. USING THE HOB

Make sure that the flame-baffle crowns, the caps and the grid have been

assembled correctly. Grid A (supplied) should be used for "woks"

(Chinese pots).

Adapter B (supplied) is to be used for small vessels.

7.1 Ignition of the burners with safety device

For each knob the corresponding burner is indicated. The device is fit

with electronic ignition. Simply press and simultaneously turn the knob

counter-clockwise on the low point flame symbol, until the burner is

ignited. Concerning models with valves, push the knob for approximately

2 seconds in order to keep the flame burning and to activate the safety

device. The burner might go off when the knob is released. In this case

repeat the aforesaid operation keeping the knob pressed for more than 2

seconds.

Should the burners go off accidentally in the models with valves, a safety

device will trip after approximately 20 seconds to block the gas outlet

even if the cock is open.

7.2 Practical advice for using the burners

For better burner performance and minimum gas

consumption, flat bottomed, even recipients must be

used, with covers and proportional in size to the

burners (see paragraph “7.3 Diameter of containers”).

To avoid overcooking or damage to the surface top

while cooking, all recipients or griddles must be

positioned within the cooking hob perimeter and must

be a minimum distance of 3-4 cm from the knobs.

1 2 ... 8 9 10 11 12 13 14 15

Pas de commentaire

Smeg ER12550NL Manuel d'utilisateur Page 13