Smeg PVA750D Manuel d'utilisateur télécharger pdf (Page 5)

Instructions for the Installer

2.4 Fitting the hob into the hole in the work-top

Take special care when fitting the hob into the work-top. If the procedures are not

carried out correctly, exactly as described, the hob may be damaged.

Before fitting the hob, remove

the pan stands (if fitted) and the

burners from the hob.

When fitting the hob, first rest the

surround entirely on the back

edge of the hole in the work-top.

Do not apply leverage to the

surround; since this part is very

delicate there is a risk of

damaging it.

Then lower the front of the hob

until the appliance is completely in

place.

1 2 3 4 5 6 7 8 9 10 ... 17 18

Pas de commentaire

Smeg PVA750D Manuel d'utilisateur Page 5