Smeg PX140 Manuel d'utilisateur télécharger pdf (Page 12)

Instructions for the User

7. Using the hob

Check that the burners, flame diffuser rings and

pan stands are fitted correctly.

The projections A on the flame diffuser rings

must be fitted into the recesses B in the burner.

The holes C in the burner must mate with the

ignition plugs and thermocouples D on the hob.

7.1 Fitting the Pan Stands

The pan stands are supplied dismantled from the hob. To place each pan stand on its

burner correctly, follow the instructions provided below:

The ends of the feet of each pan stand carry

silicone rubber pads with holes which must be

fitted onto the fixing pins provided on the hob.

Each pan stand will only fit onto its own burner.

To ensure correct positioning, each pan stand

has a different recess (as shown here) which

will fit over the projection on the corresponding

flame diffuser ring.

Take great care to fit the correct pan stand on

each burner. After the pan stand is fitted its feet

must rest on the hob and not be suspended

above it.

To fit the pan stand, first align it with the fixing

pin (1) and then lower it into place on the

hob, taking care that it fits over the flame

diffuser ring correctly (2).

1 2 ... 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Smeg PX140 Manuel d'utilisateur Page 12